Linshang LS120 UV Energy Meter for Mercury and Halogen Lamps
1. For high pressure mercury lamp and halogen lamps
2. Spectral response range: 315nm-400nm, λp = 365nm
3. Record UV intensity, energy, temperature, test duration together
4. Support PC software
Description
LS120 UV energy meter can not only measure energy, power, temperature and measuring time at the same time but also display the energy and power curves, export data and print test report. It has created many firsts in the UV energy meter industry:
1.The UV energy meter that can display the temperature curve
2.The UV energy meter can measure real-time temperature and power
3.The UV energy meter with a built-in timer that accurately records the curing time
4.The UV energy meter that can print a test report via a USB connection to a computer
Parameters
Parameter | LS120 UV Energy Meter |
Application | Light intensity, energy and temperaturemeasurement of high pressure mercury lamp |
Spectral range | 315nm – 400nm, λp = 365nm |
Power measuring range | 0 – 2000 mW/cm² |
Power resolution | 0.1 mW/cm² |
Energy measuring range | 0 – 999999mJ/cm² |
Measuring accuracy(H is the standard value) | H<5mW/cm²: ±0.5mW/cm² H>=5mW/cm²: ±10%H, ±5% (typical) |
Temperature measuring range | -55°C – +125°C |
Sampling speed | 2048 times/second |
Power data storage interval | 32 times/second |
Temperature data storage interval | 2 times/second |
Recording period | 32 min |
Power supply | 2 AAA alkaline dry batteries |
Display | Dot matrix LCD |
Test Hole Diameter | Φ10mm |
Dimension | Diameter 120mm * thickness 13mm |
Weight | 327g |
Two measurement modes available
There are two measurement modes. One is Manual mode which needs to start up or end of measurement manually. Another is automatic modes that can automatic switch-on or end of measurement when the energy intensity emitted by the light source is above or below the trigger threshold that can be set
Four interfaces help you record the data of UV light source
There are four interfaces to help you know better about UV light source you tested: In maximum values interface, you can acquire cumulative energy value, maxiumum power value and maximum temperature value. Measurement time can be recorded in RT interface. In temperature and power curve interface, you can know the temperature change and energy intensity variation of the light source. Four interfaces can be switched freely
Powerful PC software
The LS120 UV Energy Meter can be connected to PC software, which allows you to generate reports and print out test results, as well as to export test data.